Welcome


Greetings!

Thanks for visiting my vintage Hamilton watch blog. I like to restore US-made Hamilton wrist watches back to their original glory and share my experiences with other enthusiasts. Use the "Search" space below if you know what model you're looking for. Feel free to leave polite comments or questions in the spaces provided. Also check out my "watches for sale" on my Etsy site - the link is on the right, just below.

Sunday, December 31, 2017

1955 Malcolm

One of the most common questions people have about their watch is "how old is it".  Sometimes that's easily determined by a presentation on the case back but that's normally not the case - otherwise the question wouldn't be asked.  Other times them model is a one-year wonder and that makes identifying its age easy too.

Perhaps the best way to determine a watch's age is to check the serial number of the movement.  The case typically has a serial number too but that's more related to the case maker than the Hamilton model.  Of course, the serial number option has it's difficulties too, as the movement could have been changed at some point and Hamilton stopped putting serial numbers on movements starting in the 1954/55 time frame.

Another way to date particular models is to look for subtle variations in the model appearance.  Things like the stylized H logo or other elements.

A good example is the 1955 Malcolm.  It was produced for two years and there are a few ways to tell a 1955 from a 1956 Malcolm.

First, just looking at the catalog depiction of the two years, can you spot a difference?

1955

1956

One difference that's easy to spot is the price tag... the 1956 version was $25 more.  Of course that wouldn't help you identify the year unless you found a Malcolm in it's original box with price tag.  A better indicator is the diamond-shaped marker under the 12 on the 1956 version's dial.

One of the reasons for the price difference could be the introduction of the "new" 22 jewel 770 movement in the 1956 Malcolm.  The 770 came out mid-1955 so it's possible a few Malcolms from 1955 have the 770 but another clear sign of a 1955 model would be the 19 jewel 754 movement.

The Malcom has a solid 14K yellow gold case so it received the 754 movement.  14K gold filled models with 12/0 movements received the 19 jewel 753 movement and 10K gold filled models got the 17 jewel 752 grade.  All of the 12/0 movements were replaced by the 770 starting in the 1955/56 timeframe.

My Malcolm project watch looks very good but it only tells the correct time twice a day... meaning it's not running.  It's "wound tight" which basically means it's fully wound and not running.  You'll often see that referred to as "over wound" but that's a misnomer.  You really can't over wind a watch but you can fully wind a non-running watch.

Based on the lack of a marker under the 12, this should be a 1955 model (although the dial has been refinished).


This watch was a Christmas present for Truman Fairbanks in 1955.


With the bezel removed you can see the dial a little more clearly.  It's a simple dial and easy to refinish correctly.  Notice the notch on the edge by the 3.  There's also a fingerprint between the 1 and 2.  It's not mine but I'll try to remove it so that it doesn't become permanent.


The movement inside is a 19 jewel 754 movement.  You'd be hard-pressed to tell the difference between a 753 and 754 other than the circle with an H inside of it and the engravings have an orange-is enamel compared with black on the 753.  Notice this 754 doesn't have a serial number on it.  Those numbers were dropped sometime in the 1954/55 time period and you'll see other grades like 747, 748, etc. that don't have serial numbers too.  Oddly, I've heard that some 770's did have serial numbers but I've never actually seen one yet.


This model has a spacer under the dial and it has the word TOP on it.  That's a clever hack to make it a little easier to reinstall, as it can be a bit confusing to put the spacer back on (the seconds bit should be a good clue though).


Here's one reason why the watch isn't working.  The long bit of the 4th wheel that the second hand attaches to is bent.  It doesn't take much to stop a watch and a bent bit like this can have other effects on the watch.  I might be able to straighten it but 9 out of 10 times the bit breaks off when you try to re-straighten it.  Another 4th wheel from a 752. 753, 754 or a 777 would work fine.


Everything is cleaned and dried.


The reassembled watch is ticking away with good motion.  Notice the regulator is set towards slow.


Sure enough, the watch is running a smidgen slow.  The amplitude and beat error look decent though.


I'll move the regulator a little more towards the center.


That's much better.  The timekeeping is almost spot-on now.  The beat error of 2.0ms is within my tolerance for balances of this design.  I could probably improve it but doing so also risks goofing up the hairspring and I don't think the extra juice is worth the squeeze.


The finished project doesn't look that much better than what I started with.  My light tent shows a little corrosion on the hour hand and I noticed an inclusion in the glass crystal but otherwise this watch looks new old stock.


Here's another photo in more flattering light.

1 comment:

  1. Thank you for continuing to share your hobby with us - I really enjoy stopping by time to time to see your craftsmanship and check out this slice of American industrial history - happy new year !!!

    ReplyDelete