Welcome


Greetings!

Thanks for visiting my vintage Hamilton watch blog. I like to restore US-made Hamilton wrist watches back to their original glory and share my experiences with other enthusiasts. Use the "Search" space below if you know what model you're looking for. Feel free to leave polite comments or questions in the spaces provided. Also check out my "watches for sale" on my Etsy site - the link is on the right, just below.

Sunday, August 25, 2013

1930 Langley


Hamilton introduced a variety of new models in 1930 - many of which are "holy grails" for Hamilton collectors.  It seemed that the company cut it's wrist watch teeth on the geometrics of the 1920's but really hit it's stride in 1930 and beyond.

One of the very nice "entry level" solid gold models introduced in 1930 was the Langley.


The Langley was produced through 1934.  Originally it featured the 987 movement but eventually was marketed with the similarly sized, 19 jewel 979 (or 979F) movement that was used in the other solid gold models.

The Langley was produced in 14K yellow gold and 14K white gold.  There are about twice as many white versions as yellow versions.  There are even a small handful of 18K Langleys manufactured for Tiffany with Tiffany branded dials.  You'll also occasionally find specially engraved "ask the man who owns one" Langleys produced for the Packard Motor Car Company.

The Langley came with a luminous dial as well as a less common Raised Gold Figure dial with applied solid gold numerals.  Hamilton would later call this an Applied Gold Numeral dial.

The Langley can be found in a three-piece case as well as a two-piece case.  In the three-piece case the movement is held in a center section that hinges into the case back - and the case back snaps into the front bezel.

I've had the pleasure of working on a couple of Langleys for other collectors I know.  Here's a yellow gold version... notice the female spring bars needed for this type of case.  These types of bars are used when the case has pins instead of holes.  The bars go over the pins rather than sticking into holes in the bezel lugs.


Here's what a three-piece case looks like with the 19 jewel 979 movement inside the center section that is hinged into the case back.


And here's a white version of the Langley.


4 comments:

  1. Beautiful site, Thank you for all the useful information. I can spend hours here. Have you ever seen a langley with a black dial. I have a 2 piece white gold case with a 979f movement and a black dial.

    ReplyDelete
  2. I have a Hamilton Langley watch 987f 4182172 619618 17 jewels 14k white gold. Can you tell me the year for this one approximately? I'm not sure if you can also help me with a estimate of value? It is not working but looks very pretty inside i believe it will work. Some chips on the glass. Inside it has several engraved letter and numbers. Could the engraving be for repairers maybe?

    ReplyDelete
    Replies
    1. The movement dates to 1929. Value is hard to say, depends on condition, but as a project watch $500 is a fair estimate, in my opinion. All fixed up $800-$900

      Delete
  3. 1930:Hamilton Langley Packard watch

    ReplyDelete