Welcome


Greetings!

Thanks for visiting my vintage Hamilton watch blog. I like to restore US-made Hamilton wrist watches back to their original glory and share my experiences with other enthusiasts. Use the "Search" space below if you know what model you're looking for. Feel free to leave polite comments or questions in the spaces provided. Also check out my "watches for sale" on my Etsy site - the link is on the right, just below.

Monday, December 23, 2013

1949 Hardy Pocket Watch - 921 Movement

I happened to be in downtown Philadelphia this morning and killed some time walking around "jewelers row".  It's about a city block worth of jewelry stores, most of which advertise "we buy gold, watches, etc", so I thought is would be interesting to see if I could find any Hamilton project watches.

There were plenty of watches for sale but most at high retail prices and already restored.  As fortune would have it though, I came across a very cozy watch shop with a really friendly proprietor and I picked up several nice projects - one of which was a 1949 Hardy pocket watch.


Pocket watches can usually be identified by the case and bow style, along with the movement inside.  What drew my attention to the watch was the high grade, 21 jewel 921 movement.  The 921 is a 10 size grade and a step up from the 17 jewel 917 grade.  There's also a 23 jewel version called the 923.

The 921 was introduced in 1936 and produced through 1954.

Here's what I started with for my 1949 Hardy.  It's was in nice aesthetic shape but the case was a little beat up around the edges.  The dial and hands were great though.


The 921 movement was locked up tight and wouldn't wind at all.  The balance would move though when gently shaken - so that was a good sign.  If you've got a good eye for detail, you'll eventually see that the regulator is missing from the balance assembly.  The micro regulator is there to adjust it but the regulator itself is gone.


With the dial and hands removed you can see that the 921 looks a lot like the 6/0 sized 987A that you've seen me overhaul before.  The 921 is just a LOT bigger.


It turns out the reason the winding was locked up was the click was stuck.  The click is a little mechanism that prevents the large ratchet wheel from unwinding when you wind the watch.  The smaller wheel that turns the ratchet wheel is called the winding wheel - go figure.

In the shot below, all three parts are removed.  You can see that this movement has a special arbor for the mainspring and it rides in jewels in the ratchet wheel and the main plate - that accounts for two of the 21 jewels.


The barrel bridge and train bridge come off just like any other movement.   Once they're off, access to the mainspring barrel is obtained and this barrel is different than most other barrels you come across.  The reason is it opens from the opposite side so it appears like the mainspring is wound in the other direction… you're really just looking at it from the other side.  You can also see below that the arbor is actually two pieces and one of them is still inside the barrel.  The post in the center is a part of the barrel and not removable.


Here's the spring outside of the barrel and you can see that it's fairly "set" and has lost a lot of it's strength.


I'll install this NOS genuine Dynavar mainspring.


Here's the two springs side by side - you can see how much different a fresh mainspring is from a set mainspring.


Installing mainsprings is very difficult to do without a mainspring winder.  This spring is big but small enough that I can use my smaller mainspring winder to recoil it.


Here it is ready to go into the barrel.


Unfortunately, my little winder wouldn't load the spring into the barrel - the barrel was too wide for the tool and the spring just popped out.  So I'll have to turn to my "big" mainspring winder.   This one is more challenging to use but handles really big pocket watch springs with ease.




And voila - the new mainspring is installed and we're back in business.


All the parts are cleaned, dried and lubricated when they go back together.  This movement really sparkles in comparison to when it was dirty.


I happened to have a 917 with a bad balance so I removed it's regulator and will install it on this 921's balance cock.  Here you can see the two prongs that hold the hairspring and effectively control the length of the hairspring - and thereby the rate that it vibrates.  Without a regulator the watch would be limited only by the hairspring stud and would run too slow.


The freshly cleaned balance is ready to go back onto the balance cock.  This is very tricky business and the hairspring is very delicate.  It's literally the heartbeat of the watch and if you bend it out of shape the watch will not run well.


Success - the balance assembly is reinstalled and the watch is ticking away.  It is off to the timer next.


Well, it's running about two minutes slow per day… I can do better than that.


The micro regulator has a small screw that you adjust to move the regulator from side to side.  I just need to screw it "in" so the regulator moves to the left, toward the "fast" side.


Alright, 2 seconds fast per day… that's more like it.  The beat error of 6.6 is a bit higher than I usually like to see but adjusting it is a pain and would require removing the balance again.  That's the equivalent of playing with fire, so I'll leave it as is.  A high beat error can cause a watch to stop a little earlier than a watch with a low beat error when the mainspring unwinds but other than that it's not a big deal.


I happened to have a nicer 10S case so I cased this movement in it.  Technically this is no longer a Hardy - but I like it better this way.  Check out how nice and bright this movement looks now!


And here it is from the front… as you can see, this case is engraved and more decorative than the Hardy.  It's a very sharp looking dress watch now.


4 comments:

  1. Hi! I just discovered a few old watches in my dad's safe deposit box and one of them is a Hamilton "921 Blaine" that was given to his father for 30 years of service with Standard Oil--there's an engraving on the back of the case.

    It's almost exactly like this Hardy when you look at the catalog picture. Mine has a slightly different dial, too: "Hamilton" is straight, not curved; the second hand "dial" is just a bit different, too. Also, it has an AGN dial with little silver(?) dots around the circumference of the dial--larger ones at the numbers and smaller ones between them for each minute.

    I have the original box that says "921 BLAINE". The "Watch No." (serial number) is H-33124. It was presented in 1947 to my grandfather and is in near mint condition as I think he probably put it away and didn't use it every day.

    So...I wonder why they had named them "Blaine" and the "Hardy" when they're almost identical. Also, I didn't find the serial numbers listed in the tables. Any idea on the year it was manufactured?

    Thanks!

    ReplyDelete
    Replies
    1. The movement dates to 1946. The Hardy is gold filled while the Blaine is solid 14K gold. The dials are slightly different too. The AGN dial you describe is the E2 dial, while the Hardy AGN dial is an E-044. So they may look similar but they are very different.

      Delete
  2. Some pictures can be found here:
    http://s1380.photobucket.com/user/Bob_Beecher/library/Hamilton%20921%20Blaine

    ReplyDelete
  3. I just picked up a Hamilton 921 that looks exactly like yours. Amazing shape and its already wound! But no tick! Im way to new or inequiped to repair it. But i also got a bulova 17ah that dies tick! But her face is rather scuffed. Great read i hope to get my Hamilton repaired!

    ReplyDelete