Welcome


Greetings!

Thanks for visiting my vintage Hamilton watch blog. I like to restore US-made Hamilton wrist watches back to their original glory and share my experiences with other enthusiasts. Use the "Search" space below if you know what model you're looking for. Feel free to leave polite comments or questions in the spaces provided. Also check out my "watches for sale" on my Etsy site - the link is on the right, just below.

Wednesday, August 6, 2014

1964 Pan Europ 64017-4 - well, sort of

Hamilton made some models for the European market only, it seems.  Although sometimes the same, or similar models were also released in the USA.  One of the models that comes to mind is the 1964 Pan Europ.  In stainless steel, it's also called the Dateline A-579.


The Pan Europ 64017-4 comes in a yellow rolled gold plated case with a screw on stainless steel back.  Inside is a Hamilton 64A - a 21 jewel automatic movement with a date complication.  It's based on  an ETA 2452.  It's very similar to the Hamilton 689 - which is the non-date version and based on the ETA 2451.  The extra 4 jewels over the 17 jewel 689 are in the oscillating weight gear train.

The color of the "yellow" model is sort of a greenish yellow - this is similar to other European watches I've seen.  The yellow is not quite as warm a yellow as other yellow gold models you typically see.

Pan Europ models are very popular - I don't know why that is... maybe it's the date at 6 but they routinely sell well.

I recently scored a Pan Europe that the seller said "just needs to be cleaned".  I didn't look to closely at it other than to make sure the dial was in good shape.

As received, the dial looked okay but the case was pretty beat up.


The back of the watch has been woefully abused by someone with cheap tools - as it's all gouged up by someone trying to open it.  The back of the Pan Europ model has a Pegasus on the back - it looks a lot like some vintage Omega Seamasters I've seen - maybe that's another reason why they tend to sell so well?


The movement does need to be cleaned, but the seller was pretty much full of crap.  This watch is missing the jewels under the KIF shock protector on the balance.  You could clean this watch until the cows came home but without balance jewels it won't run.


The dial-side of the pillar plate looks like other calendar movements I've seen like the Dateline S-575.  I need to take the calendar wheel off before cleaning this movement and that means I need to take off a lot of little, spring-loaded pieces.


Here's an example of some of the tiny pieces that are sure to get lost if you're not super careful.


The dial-side is starting to look like a normal, non-date movement now.


Two screws hold the rotor (oscillating weight) on.  The screw in the middle of the carrier will remove the rotor and then all the little gears can come out.


Without the rotor, the movement looks just like other manual-winding ETA movements.  If you've got good eyes you might be able to spot the balance jewel under the balance wheel, on the left.  If I had a good Kif shock spring to install, I could probably reinstall the jewels.


While all the parts are being cleaned, I'll clean the case and prep the crystal to go back in.  This crystal is a special style with a gold-colored reflector ring.


Because of the reflector ring, this style of crystal has to be pressed in.  The crystal lifter (aka "the claw") doesn't compress the crystal due to the reflector ring - so the press is the only way to go.


I swapped a balance cock from a spare 689 so the movement is now back to running condition.


A little tweaking to the regulator is all that's needed to get the watch running just as it should.


Well everything goes back into the case and a new strap is added to complete the watch.  But something just isn't right with this watch... sure it's still a little beat up still but something's just not right.


It's missing the bezel!   I didn't even realize that the reason the case looked so unusual was a key piece of the watch is missing in action!  The Pan Europ is supposed to have a cushion-shaped bezel that pops on.

It should look like this one... with it's original bracelet, thanks to a fellow collector.  Notice how the yellow of the case is a little different than the bracelet?  It's subtle but it's there.


I guess my hunt for a Pan Europ will have to continue - but all I need now is the case - the rest of the watch is good to go.   If you need the guts of a Pan Europ, let me know.

UPDATE:

I managed to find another project watch with a case with worn lugs but a correct bezel.  So, I installed it on my original watch to complete it's restoration.  I think it turned out alright and looks much better with the bezel and a more appropriate crown.  Don't you think?


23 comments:

  1. It's OK. The crown doesn't match the one on mine, which I bought for £10 or £15 working in superb condition! But yours has a date.

    ReplyDelete
    Replies
    1. Interesting that your's does not have a date... what are the numbers on the back of the case?I'm not surprised the crown doesn't match though. Probably not 64017-4, is my guess.

      Delete
  2. Any idea where one might acquire a replacement crystal for this model? Could a generic one be made to fit?

    ReplyDelete
    Replies
    1. A GS EvrTite ET crystal in the correct diameterwith a yellow ring would do fine.

      Delete
    2. Thanks for the reply. I Was having a hard time finding the correct type of crystals and this helped a ton. Thank you.

      Delete
  3. Have pan europ 64017-4 which belonged to my uncle. In good working order but don't know how to change date.
    Any ideas, thanks, Mick

    ReplyDelete
    Replies
    1. Pretty easy... just advance the time to midnight when the date changes. Then back up four hours to 8:00 and advance again. Repeat until you get to the date you want and then advance to the correct time.

      Delete
    2. Thank you very much.
      What would be a typical selling price this watch, should it go on ebay or a a specialist watch site?
      I do not normally wear a watch as I tend to break then as I am in chemical industry so it would be wasted on me!!
      Thanks again

      Delete
    3. eBay is probably the best route

      Delete
  4. I have a auto date self winding Hamilton Pan-europ SN 694A. Does anyone know what year this watch was made? Thanks

    ReplyDelete
  5. Hi Dan: Any luck finding a bezel? I am also in a search for the very same item!

    ReplyDelete
    Replies
    1. That was a long time ago but yes, I found a project watch with bad lugs but good bezel and used it

      Delete
  6. Hello Dan, I’m currently trying to have my pan europ (same model here) serviced. The watchmaker has informed me that a few parts need to be fabricated. Any tips for sourcing parts?

    ReplyDelete
    Replies
    1. Hi Dan, not sure why my comment here was set to "anonymous," so I wanted to reply here to show I am a real person!

      Delete
    2. Its a very common ETA movement, not sure what would need to be fabricated but most any watch parts supply house would likely be able to help.

      Delete
    3. I appreciate the feedback! At this point I am unsure if the watchmaker is not expanding on what is needed. They quoted me over $500 to secure parts and labor, but only cited the mainspring and barrel cock as needing replacement. They told me they would need to fabricate a mainspring as well. Thank you again.

      Delete
    4. Find another (better) watchmaker. Anyone who thinks they need to fabricate a mainspring should know how to purchase one.

      Delete
  7. I have Paneurope and also am missing the top bezel. Can anyone who sees this help?
    Also would love the original bracelet. Please!!!

    ReplyDelete
  8. I’m at scover000@gmail.com

    ReplyDelete
  9. I know it’s an old post but if anyone is looking I need a replacement crown and stem for my watch which is exactly like the one you have shown being restored here. Great write up btw… oh and my watch was In working order until i dropped it while putting on a band..broke the crown right off. My question is what are the part numbers for the crown and stem?

    ReplyDelete
    Replies
    1. The crown is a tap 10 yellow crown and the style would need to match the contour of the case. I don't recall if it's a water-proof style or dress style (I think it's likely waterproof). The stem is universally part 404 but for an ETA 2451/2452. If you're not sure what to do from there, consult a watchmaker.

      Delete
  10. Dan, I wound up buying another paneurope luckily in perfect condition. I can’t even believe it how nice it is. So any way I still have that first watch and located a parts case with a bezel. How does one get the bezel off?

    ReplyDelete
    Replies
    1. It snaps on and off. A case knife will pry it off and a crystal press will put it back on.

      Delete